Cart

800.345.0425

3" x 1-1/4" Hard Rubber with Swivel Caster - Select Expanding Stem Size - 300 Lbs Capacity

Part # 8GS30KP-HR-EXP

Availablity: Usually ships in 24-48 hours
+


3" x 1-1/4" HARD RUBBER WHEEL WITH BALL BEARINGS HOLLOW KINGPIN CASTER - Part #: 8GS30KP-HRB-EXP

Hard rubber wheels are economically priced and recommended for applications that require higher weight capacities than soft rubber wheels can handle. These wheels work best for applications that don’t require non-marking treads or sitting in place for long periods of time. They also work well in outdoor environments and roll well over small debris, rough floors, cracks, and floor joints.

We would not recommend these wheels for applications that require sitting in one spot for long periods of time under load. 

SPECIFICATIONS:

Load Capacity (lbs.): 300 Link to Replacement Wheel:  QHRB3H3
Wheel Diameter: 3" Caster Rig Color/Finish: Silver Zinc
Tread Width: 1-1/4" Swivel or Rigid Caster: Swivel 
Wheel Type: Hard Rubber Swivel Radius: 2-7/8"
Wheel Bearing Type: Ball Swivel Construction: Hollow Kingpin
Overall Height: 4-1/8" Temp Range:  -40˚ to 160˚F 
Stem Type: Hollow Kingpin Wheel Durometer: Shore D 55 (+/-5)
Stem Size: Various up to 1/2" Wheel Color: Black
Clinched Hole Size: 1/2" Weight: 1.5 lbs.

 

How to Install Expanding Stem Casters

  1. Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut.  This will bring the top nut down and cause the rubber element to bulge out.

  2. Check to see if caster stem will slip into hollow leg.  It should be hard to push into the leg.  If it slips in too easily, then you may need to squeeze the element again as described in step one.

  3. Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more.  The caster should now be securely in place.  This procedure will work for both round and square leg.

PICTURE PART# (Click to buy) FITS I.D. SIZE
 E9 E9 3/4" - 25/32"
E11 E11 7/8" - 29/32"
E13 E13 15/16" - 1"
E15 E15 11/16" - 11/8"
E17B E17B 13/16"
E19C E19C 13/8"
E19A E19A 11/2"
E21 E21 13/4" - 113/16"

PRODUCT DETAILS

3" x 1-1/4" HARD RUBBER WHEEL WITH BALL BEARINGS HOLLOW KINGPIN CASTER - Part #: 8GS30KP-HRB-EXP

Hard rubber wheels are economically priced and recommended for applications that require higher weight capacities than soft rubber wheels can handle. These wheels work best for applications that don’t require non-marking treads or sitting in place for long periods of time. They also work well in outdoor environments and roll well over small debris, rough floors, cracks, and floor joints.

We would not recommend these wheels for applications that require sitting in one spot for long periods of time under load. 

SPECIFICATIONS:

Load Capacity (lbs.): 300 Link to Replacement Wheel:  QHRB3H3
Wheel Diameter: 3" Caster Rig Color/Finish: Silver Zinc
Tread Width: 1-1/4" Swivel or Rigid Caster: Swivel 
Wheel Type: Hard Rubber Swivel Radius: 2-7/8"
Wheel Bearing Type: Ball Swivel Construction: Hollow Kingpin
Overall Height: 4-1/8" Temp Range:  -40˚ to 160˚F 
Stem Type: Hollow Kingpin Wheel Durometer: Shore D 55 (+/-5)
Stem Size: Various up to 1/2" Wheel Color: Black
Clinched Hole Size: 1/2" Weight: 1.5 lbs.

 

How to Install Expanding Stem Casters

  1. Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut.  This will bring the top nut down and cause the rubber element to bulge out.

  2. Check to see if caster stem will slip into hollow leg.  It should be hard to push into the leg.  If it slips in too easily, then you may need to squeeze the element again as described in step one.

  3. Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more.  The caster should now be securely in place.  This procedure will work for both round and square leg.

PICTURE PART# (Click to buy) FITS I.D. SIZE
 E9 E9 3/4" - 25/32"
E11 E11 7/8" - 29/32"
E13 E13 15/16" - 1"
E15 E15 11/16" - 11/8"
E17B E17B 13/16"
E19C E19C 13/8"
E19A E19A 11/2"
E21 E21 13/4" - 113/16"

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS