Cart

800.345.0425

12" x 3" Cast Iron Wheel P70 Rigid Caster - 2,500 Lbs Capacity

Part # P7012301STL2

Availablity: Usually ships in 24-48 hours
+


12" x 3" Cast Iron Wheel Rigid Caster - Part # P7012301STL2

Cast Iron is the standard metal wheel used by most unless a heavier capacity or greater impact strength metal wheel is needed. For applications requiring more capacity or impact strength, check out the ductile steel & forged steel wheel caster options.

While semi steel is very strong, it is tough on floors and could lead to floor damage. For heavy duty floor protective wheels, be sure to check out our polyurethane wheels.

*Please note temperature ratings are dependent upon the bearing selected. Unless noted otherwise in the options, bearings with have a 180°F temperature rating.

*Caster ordered with welded on swivel locks or toe guards will have a 3-6 business day lead time to ship.

Specifications:

Load Capacity (lbs.): 2,500 Link to Matching Swivel Caster: P7112301101
Wheel Diameter: 12" Caster Rig Material Type: AISI 1045 Heat Treated Laser Cut Steel
Tread Width: 3" Caster Rig Color/Finish: Bright Zinc Plated
Wheel Type: Cast Iron Swivel or Rigid Caster: Rigid
Wheel Bearing Type: See Bearings Options Swivel Radius: N/A
Overall Height: 15-1/2" Swivel Construction: N/A
Temp Range: -45°F to 600°F (Depending on Bearings Selected) Mounting Plate: 5-1/4" x 7-1/4"
Wheel Hardness:  Brinell 145 Bolt Hole Pattern: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"
Wheel Color: Silver Mounting Bolt Size: 1/2" or Smaller
Link to Replacement Wheel: QSTL10R0 Weight (lbs): 29

Caster Options:

Bearings: For a description and picture of each bearing type - Click Here

Face Contact Brake: Designed for heavy duty casters, this brake can be activated be either foot or hand. The brake pad presses on the face of the wheel to prevent the wheel from spinning.

Weld Plate / Shim: This heavy duty caster can be ordered with an additional weld plate. This allows you to weld the additional plate to the equipment and then bolt the caster on. If you ever need to remove or replace the caster it is much easier than cutting off the old caster and then welding the new caster back on. The plate can also be used to add additional height to the caster. The plate is .350" thick and is zinc plated. The dimensions match the picture of the drawing and can also be found in the specifications section. 

4-Position Swivel Lock: This allows you to turn a swivel caster into a rigid caster. When the pin is released into one of the 4 slots located 90 degrees apart, it locks the swivel section in place. Both a welded on option and a field installable bolt on option are available. 

Toe Guard: This option is designed to help prevent toes and other objects from being rolled over by the heavy duty caster.

PRODUCT DETAILS

12" x 3" Cast Iron Wheel Rigid Caster - Part # P7012301STL2

Cast Iron is the standard metal wheel used by most unless a heavier capacity or greater impact strength metal wheel is needed. For applications requiring more capacity or impact strength, check out the ductile steel & forged steel wheel caster options.

While semi steel is very strong, it is tough on floors and could lead to floor damage. For heavy duty floor protective wheels, be sure to check out our polyurethane wheels.

*Please note temperature ratings are dependent upon the bearing selected. Unless noted otherwise in the options, bearings with have a 180°F temperature rating.

*Caster ordered with welded on swivel locks or toe guards will have a 3-6 business day lead time to ship.

Specifications:

Load Capacity (lbs.): 2,500 Link to Matching Swivel Caster: P7112301101
Wheel Diameter: 12" Caster Rig Material Type: AISI 1045 Heat Treated Laser Cut Steel
Tread Width: 3" Caster Rig Color/Finish: Bright Zinc Plated
Wheel Type: Cast Iron Swivel or Rigid Caster: Rigid
Wheel Bearing Type: See Bearings Options Swivel Radius: N/A
Overall Height: 15-1/2" Swivel Construction: N/A
Temp Range: -45°F to 600°F (Depending on Bearings Selected) Mounting Plate: 5-1/4" x 7-1/4"
Wheel Hardness:  Brinell 145 Bolt Hole Pattern: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"
Wheel Color: Silver Mounting Bolt Size: 1/2" or Smaller
Link to Replacement Wheel: QSTL10R0 Weight (lbs): 29

Caster Options:

Bearings: For a description and picture of each bearing type - Click Here

Face Contact Brake: Designed for heavy duty casters, this brake can be activated be either foot or hand. The brake pad presses on the face of the wheel to prevent the wheel from spinning.

Weld Plate / Shim: This heavy duty caster can be ordered with an additional weld plate. This allows you to weld the additional plate to the equipment and then bolt the caster on. If you ever need to remove or replace the caster it is much easier than cutting off the old caster and then welding the new caster back on. The plate can also be used to add additional height to the caster. The plate is .350" thick and is zinc plated. The dimensions match the picture of the drawing and can also be found in the specifications section. 

4-Position Swivel Lock: This allows you to turn a swivel caster into a rigid caster. When the pin is released into one of the 4 slots located 90 degrees apart, it locks the swivel section in place. Both a welded on option and a field installable bolt on option are available. 

Toe Guard: This option is designed to help prevent toes and other objects from being rolled over by the heavy duty caster.

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS