Cart

800.345.0425

Sliding Barn Door Hinge Hangers with Hardware Kit (No Track)

Part # BARNDHANGHINGE-2HW

+


Part # BarnDHangHinge-2HW

Product Description

This sliding interior barn door hanger kit is perfect for anyone looking to install a DIY barn door. It can be painted to meet your design style or used as is. The barn door kit includes everything you need to install besides the track. Basic installation instructions will be included and other helpful hints can be found online. Save on the shipping costs and get the track and door at your local steel supply store, Lowes, Home Depot, or other home improvement store!

General Information

- Track NOT included (check out our complete barn door kits if you need a track)

- Hardware works with doors of 1-1/4" to 2-1/4" Thickness

- Track hanger 1-11/16 off wall. A backer board might be needed depending on your application

- 200 pound capacity for two hangers, 400 pounds capacity for four hangers

- Track needs to be 3/16" thick (width and length can be your preference. The tracks we sell with the kits are 1.5" wide) 

- General Rule: Track length needs to be double the size of the door

The parts included are as follows:

  • Two hinge style hangers with 3" cast iron wheel, Hanger Length is 10-1/2" total and 8" from wheel groove to end of hanger. The Hanger is 3" wide where the two holes are and 1-1/2" wide where the single hole at the bottom is.
  • All hardware to attach track to the wall -
    • 1-5/8" Spacers that goes between the track and wall (8 pc) - Track will hang 1-11/16" from wall with the spacer and washer that goes in between. Longer spacers and bolts can be used if additional length from wall is needed. (Not Included)
    • Washers to be placed behind spacers (8 pc)
    • 5/16" x 4.5" Lag Bolts to attach track to wall (8 pc)
    • 5/16" x 1-1/2" Lag Bolts to attach hangers to door
    • 2" x 2" angle iron end stops
    • 2 safety anti-jump clips to prevent possible derailment with 1/4" x 1-1/2" lag bolts
    • Floor mounted door guide if you would like to use a mortise or kerf cut on the bottom of the door with 1/4" x 1-1/2" lag bolt
    • Made from Quality Steel in the USA

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

PRODUCT DETAILS

Part # BarnDHangHinge-2HW

Product Description

This sliding interior barn door hanger kit is perfect for anyone looking to install a DIY barn door. It can be painted to meet your design style or used as is. The barn door kit includes everything you need to install besides the track. Basic installation instructions will be included and other helpful hints can be found online. Save on the shipping costs and get the track and door at your local steel supply store, Lowes, Home Depot, or other home improvement store!

General Information

- Track NOT included (check out our complete barn door kits if you need a track)

- Hardware works with doors of 1-1/4" to 2-1/4" Thickness

- Track hanger 1-11/16 off wall. A backer board might be needed depending on your application

- 200 pound capacity for two hangers, 400 pounds capacity for four hangers

- Track needs to be 3/16" thick (width and length can be your preference. The tracks we sell with the kits are 1.5" wide) 

- General Rule: Track length needs to be double the size of the door

The parts included are as follows:

  • Two hinge style hangers with 3" cast iron wheel, Hanger Length is 10-1/2" total and 8" from wheel groove to end of hanger. The Hanger is 3" wide where the two holes are and 1-1/2" wide where the single hole at the bottom is.
  • All hardware to attach track to the wall -
    • 1-5/8" Spacers that goes between the track and wall (8 pc) - Track will hang 1-11/16" from wall with the spacer and washer that goes in between. Longer spacers and bolts can be used if additional length from wall is needed. (Not Included)
    • Washers to be placed behind spacers (8 pc)
    • 5/16" x 4.5" Lag Bolts to attach track to wall (8 pc)
    • 5/16" x 1-1/2" Lag Bolts to attach hangers to door
    • 2" x 2" angle iron end stops
    • 2 safety anti-jump clips to prevent possible derailment with 1/4" x 1-1/2" lag bolts
    • Floor mounted door guide if you would like to use a mortise or kerf cut on the bottom of the door with 1/4" x 1-1/2" lag bolt
    • Made from Quality Steel in the USA

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS