Cart

800.345.0425

Double Sliding Barn Door Hardware Kit Hinge Hanger with 9 Foot Track Included

Part # BARNDK9DUAL-HINGE

Availablity: Usually ships in 24-48 hours
+


Part # BarnDK9Dual-Hinge

Product Description

This hinge style sliding interior barn door kit is perfect for anyone looking to install a DIY barn door. It can be painted to meet your design style or used as is for a rustic look. The barn door kit includes everything you need besides the tools to install it. Basic installation instructions will be included and other helpful hints can be found online.

General Information

- The track is not predrilled to allow you to 5/16" drill holes at the necessary locations

 - Hardware works with doors of 1-1/4" to 2-1/4" Thickness

 - All lengths of track 7-12 feet and over will come in two pieces with splice kit included. Track lengths from 13-16 will come in three pieces with splice kits included 

 - Track hanger 1-11/16 off wall – A backer board might be needed depending on your application

 - General Rule: Track length needs to be double the size of the door

The parts included are as follows:

  • Four hinge style hangers with 3" cast iron wheel - Hanger Length is 10-1/2” total and 8" from wheel base to end of hanger. The Hanger is 3" wide where the two holes are and 1-1/2" wide where the single hole at the bottom is by 3/16" thick. The holes to attach to the door are located 1" and 6-3/4" from the bottom of the hanger. 
  • 9 Foot Long x 1-1/2" Wide x 3/16" Thick Track 
  • All hardware to attach track to the wall -
    • 1-5/8" Spacers that goes between the track and wall - Track will hang 1-11/16" from wall with the spacer and washer that goes in between. Longer spacers and bolts can be used if additional length from wall is needed. (Not Included)
    • Washers to be placed behind spacers 
    • 5/16" x 4.5" Lag Bolts to attach track to wall
    • 5/16" x 1-1/2" Lag Bolts to attach hangers to door
    • 2" x 2" angle iron end stops 
    • 2 safety anti-jump clips to prevent possible derailment with 1/4" x 1-1/2" lag bolts
    • Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us)
    • Made from Quality Steel in the USA

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

PRODUCT DETAILS

Part # BarnDK9Dual-Hinge

Product Description

This hinge style sliding interior barn door kit is perfect for anyone looking to install a DIY barn door. It can be painted to meet your design style or used as is for a rustic look. The barn door kit includes everything you need besides the tools to install it. Basic installation instructions will be included and other helpful hints can be found online.

General Information

- The track is not predrilled to allow you to 5/16" drill holes at the necessary locations

 - Hardware works with doors of 1-1/4" to 2-1/4" Thickness

 - All lengths of track 7-12 feet and over will come in two pieces with splice kit included. Track lengths from 13-16 will come in three pieces with splice kits included 

 - Track hanger 1-11/16 off wall – A backer board might be needed depending on your application

 - General Rule: Track length needs to be double the size of the door

The parts included are as follows:

  • Four hinge style hangers with 3" cast iron wheel - Hanger Length is 10-1/2” total and 8" from wheel base to end of hanger. The Hanger is 3" wide where the two holes are and 1-1/2" wide where the single hole at the bottom is by 3/16" thick. The holes to attach to the door are located 1" and 6-3/4" from the bottom of the hanger. 
  • 9 Foot Long x 1-1/2" Wide x 3/16" Thick Track 
  • All hardware to attach track to the wall -
    • 1-5/8" Spacers that goes between the track and wall - Track will hang 1-11/16" from wall with the spacer and washer that goes in between. Longer spacers and bolts can be used if additional length from wall is needed. (Not Included)
    • Washers to be placed behind spacers 
    • 5/16" x 4.5" Lag Bolts to attach track to wall
    • 5/16" x 1-1/2" Lag Bolts to attach hangers to door
    • 2" x 2" angle iron end stops 
    • 2 safety anti-jump clips to prevent possible derailment with 1/4" x 1-1/2" lag bolts
    • Floor mounted door guide fits doors up to 1-7/8" width or can be used with a 1/8" mortise or kerf cut on the bottom of the door (for wider door guides, please contact us)
    • Made from Quality Steel in the USA

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS