These 3/4" I.D. Flanged Brass Bushings can be used in many applications, but are specifically designed for high temperature or corrosive applications. These bearings also work well for applications that are particularly hard on bearings, like sand blasting rooms. While these bushings do not require grease, it is perfectly fine to use it. If higher temperatures are needed, check out our tin bronze bushings.
| Bearing ID: 3/4" | Hub Length 1-1/2" Wheel Installed: 1.825" |
| Bearings OD: 1-3/16" | Hub Length 2" Wheel Installed: 2.387" |
| Temp Range: -45˚F to 500˚F |
These 3/4" I.D. Flanged Brass Bushings can be used in many applications, but are specifically designed for high temperature or corrosive applications. These bearings also work well for applications that are particularly hard on bearings, like sand blasting rooms. While these bushings do not require grease, it is perfectly fine to use it. If higher temperatures are needed, check out our tin bronze bushings.
| Bearing ID: 3/4" | Hub Length 1-1/2" Wheel Installed: 1.825" |
| Bearings OD: 1-3/16" | Hub Length 2" Wheel Installed: 2.387" |
| Temp Range: -45˚F to 500˚F |
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media