$34.60
Part # 5043-3TPR
Designed for gates with a bottom clearance of 2 inch to 5-1/2 inches from the ground and 2" or less of ground slope. For best performance, mount at the end of the gate positioned at the lowest point along its travel path.
Technical Note - Can be mounted on gates with less than 2″ bottom clearance. However, any clearance below 2″ reduces spring travel by the same amount. For example, with 2″ clearance, spring travel is limited to 1″, so the ground slope must also be 1″ or less.
Spring-loaded gate casters are designed to support and guide heavy gates while providing smooth, controlled movement over uneven surfaces. These casters feature an integrated spring mechanism that allows vertical movement to absorb bumps, dips, or slopes in the ground—helping to keep the gate aligned and reducing strain on hinges and mounting hardware.
Commonly used on swing gates, fence gates, barn doors, and other large panels, spring-loaded gate casters help prevent sagging and prolong the life of your gate system. The spring action also helps maintain consistent contact with the ground, ensuring stability and easier operation.
Thermoplastic Rubber wheels protect floors, roll smoothly without marking, and deliver lasting durability outdoors.
| Load Capacity (lbs.): 25 | Wheel Type: Thermoplastic Rubber |
| Spring Deflection Weight Range: 2 to 25 Lbs. | Wheel Diameter: 3" |
| Spring Movement (Travel) : 2" | Tread Width: 7/8" |
| Rotating Spacing (Radius): 2-1/2" | Wheel Bearing Type: Plain |
| Mounting Plate: 1" Wide x 3-5/8" Tall | Wheel Durometer: Shore A 65 (±5) |
| Bolt Hole Pattern: 2-1/8" (Two Holes) | Swivel Construction: Double Ball Raceway |
| Caster Rig Color/Finish: Bright Zinc Plated | Attaching Bolt Size: 5/16" or Smaller |
Designed for gates with a bottom clearance of 2 inch to 5-1/2 inches from the ground and 2" or less of ground slope. For best performance, mount at the end of the gate positioned at the lowest point along its travel path.
Technical Note - Can be mounted on gates with less than 2″ bottom clearance. However, any clearance below 2″ reduces spring travel by the same amount. For example, with 2″ clearance, spring travel is limited to 1″, so the ground slope must also be 1″ or less.
Spring-loaded gate casters are designed to support and guide heavy gates while providing smooth, controlled movement over uneven surfaces. These casters feature an integrated spring mechanism that allows vertical movement to absorb bumps, dips, or slopes in the ground—helping to keep the gate aligned and reducing strain on hinges and mounting hardware.
Commonly used on swing gates, fence gates, barn doors, and other large panels, spring-loaded gate casters help prevent sagging and prolong the life of your gate system. The spring action also helps maintain consistent contact with the ground, ensuring stability and easier operation.
Thermoplastic Rubber wheels protect floors, roll smoothly without marking, and deliver lasting durability outdoors.
| Load Capacity (lbs.): 25 | Wheel Type: Thermoplastic Rubber |
| Spring Deflection Weight Range: 2 to 25 Lbs. | Wheel Diameter: 3" |
| Spring Movement (Travel) : 2" | Tread Width: 7/8" |
| Rotating Spacing (Radius): 2-1/2" | Wheel Bearing Type: Plain |
| Mounting Plate: 1" Wide x 3-5/8" Tall | Wheel Durometer: Shore A 65 (±5) |
| Bolt Hole Pattern: 2-1/8" (Two Holes) | Swivel Construction: Double Ball Raceway |
| Caster Rig Color/Finish: Bright Zinc Plated | Attaching Bolt Size: 5/16" or Smaller |
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media