$47.67
Part # 43220XRGFN
Availablity: Usually ships in 24-48 hoursHigh temperature nylon wheels are rated for continuous temperatures up to 425°F & intermittent temperatures up to 475°F. Intermittent use refers to cycles of approximately 30 minutes at elevated temperatures followed by 30 minutes of cooling. These wheels perform well in both wet & dry high heat environments while resisting oil, grease, most acids, chemicals & cleaning solutions. Their hard tread rolls smoothly on smooth floors & is paired with precision ball bearings for easier rolling performance. The tread is non-marking & is great for rolling on smooth concrete. Wouldn't recommend for hardwood, tile or finished floors as dirt under the wheels could scratch them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capacity: 450 lbs. |
|
|
Tread Width:7/8" Each wheel (1-7/8" Combined) |
|
|
|
Bolt Hole Pattern: 1-3/4" to 2-7/8" slotted to 3"
|
|
Mounting Bolt Size: 3/8" or Smaller
|
Tread Shape:Flat |
Bearing Type: Ball Bearing |
Wheel Type:Glass Filled Nylon |
Wheel Durometer:Shore D 85 (±5) |
|
|
|
|
|
|
Wheel Color:Blue |
Temp Range:-20˚F to 425˚F (475˚F Intermittent) |
Weight:1.51 Lbs. |
|
|
|
|
High temperature nylon wheels are rated for continuous temperatures up to 425°F & intermittent temperatures up to 475°F. Intermittent use refers to cycles of approximately 30 minutes at elevated temperatures followed by 30 minutes of cooling. These wheels perform well in both wet & dry high heat environments while resisting oil, grease, most acids, chemicals & cleaning solutions. Their hard tread rolls smoothly on smooth floors & is paired with precision ball bearings for easier rolling performance. The tread is non-marking & is great for rolling on smooth concrete. Wouldn't recommend for hardwood, tile or finished floors as dirt under the wheels could scratch them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capacity: 450 lbs. |
|
|
Tread Width:7/8" Each wheel (1-7/8" Combined) |
|
|
|
Bolt Hole Pattern: 1-3/4" to 2-7/8" slotted to 3"
|
|
Mounting Bolt Size: 3/8" or Smaller
|
Tread Shape:Flat |
Bearing Type: Ball Bearing |
Wheel Type:Glass Filled Nylon |
Wheel Durometer:Shore D 85 (±5) |
|
|
|
|
|
|
Wheel Color:Blue |
Temp Range:-20˚F to 425˚F (475˚F Intermittent) |
Weight:1.51 Lbs. |
|
|
|
|
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media
Capacity: 450 lbs.
Tread Width:7/8" Each wheel (1-7/8" Combined)
Tread Shape:Flat
Bearing Type: Ball Bearing
Wheel Type:Glass Filled Nylon
Wheel Durometer:Shore D 85 (±5)
Wheel Color:Blue
Temp Range:-20˚F to 425˚F (475˚F Intermittent)
Weight:1.51 Lbs.