$144.26
Part # FMR08025X5D
Availablity: Usually ships in 24-48 hoursThis wheel is most used on Core Cut 500 concrete saws, however, it can be used for other concrete saws and applications too. Please check your wheel measurements to be sure it will fit your application.
*Please note this wheel has two two 5/16-18 holes on the face of the hub (see images). It DOES NOT have the traditional set screws*
Rubber on iron wheels provide a smooth, quiet, cushioned ride while protecting floors. However, the black rubber may leave marks, similar to tire skid marks. For non-marking performance or higher load capacity, consider our polyurethane wheels as an alternative.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capacity:550 lbs. |
Wheel Type:Rubber on Iron |
|
|
Tread Width:2-1/2" |
|
Hub Length (without Bearings):
2-3/4" |
|
Hub Length (with Bearings): N/A
|
Bearing Type:None |
Plain Bore ID:1-1/4" |
|
|
|
|
Accepted Axle/Bearing ID:1-1/4" |
Wheel Durometer:Shore A 70 (±5) |
Wheel Tread Shape:Slightly Crowned |
Temp Range: -70˚F to 160˚F |
Wheel Color:Black |
Weight: 9.488 lbs |
This wheel is most used on Core Cut 500 concrete saws, however, it can be used for other concrete saws and applications too. Please check your wheel measurements to be sure it will fit your application.
*Please note this wheel has two two 5/16-18 holes on the face of the hub (see images). It DOES NOT have the traditional set screws*
Rubber on iron wheels provide a smooth, quiet, cushioned ride while protecting floors. However, the black rubber may leave marks, similar to tire skid marks. For non-marking performance or higher load capacity, consider our polyurethane wheels as an alternative.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capacity:550 lbs. |
Wheel Type:Rubber on Iron |
|
|
Tread Width:2-1/2" |
|
Hub Length (without Bearings):
2-3/4" |
|
Hub Length (with Bearings): N/A
|
Bearing Type:None |
Plain Bore ID:1-1/4" |
|
|
|
|
Accepted Axle/Bearing ID:1-1/4" |
Wheel Durometer:Shore A 70 (±5) |
Wheel Tread Shape:Slightly Crowned |
Temp Range: -70˚F to 160˚F |
Wheel Color:Black |
Weight: 9.488 lbs |
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media
Capacity:550 lbs.
Wheel Type:Rubber on Iron
Tread Width:2-1/2"
Bearing Type:None
Plain Bore ID:1-1/4"
Accepted Axle/Bearing ID:1-1/4"
Wheel Durometer:Shore A 70 (±5)
Wheel Tread Shape:Slightly Crowned
Temp Range: -70˚F to 160˚F
Wheel Color:Black
Weight: 9.488 lbs