4" x 2" Heavy Duty Steel Toolbox & Gangbox Casters, 900 lb Capacity each Caster, 3,600 lbs Total capacity - Part # 146CIRB420-TOOLBOX
This toolbox caster kit contains two swivel with brake casters with (4 in. x 2 in.) steel wheels & two rigid Casters with two (4 in. x 2 in.) steel wheels. A combination of swivel & rigid casters provide you the ability to steer your toolbox in a desired direction. This kit also includes 16 one-inch long bolts (5/16), 16 nuts (5/16) & 16 washers to mount the casters to your pit. Each heavy duty caster in this kit can hold up to 900 lbs. per caster. All four casters together give you a total capacity of 3600 lbs. when weight is evenly distributed. Typically, the larger the wheel is on a caster, the easier it is to roll. We also offer a (5 in. x 2 in.) & (6 in. x 2 in.) toolbox caster kits. Make sure to be mindful of clearance though. These casters give you an overall height of 5-5/8 inches from the ground.
Cast Iron is the standard metal wheel used by most industries unless a heavier capacity is needed. Great for carrying constant heavy loads like a job box. The heavy duty cast iron wheels come with thicker treads, stronger spokes, & larger hub diameter compared to the standard cast iron.While cast iron is very strong, it is tough on floors & could lead to floor damage.
SHOULD mount to Milwaukee, Ridgid, Jobox, Husky, Kobalt, Westward, Dewalt, Knaack, Entrix & more toolboxes/jobsite boxes. PLEASE CONFIRM FOR YOURSELF PRIOR TO PURCHASING. Check the photos for exact dimensions (4-1/2 in x 4 in. plate).
*This kit can be used for other applications such as BBQ pits & more.
Specifications:
Load Capacity (lbs.): 900 lbs. |
Link for Replacement Caster
Swivel Caster: 146CIRB420S Rigid Caster: 146CIRB420R
|
Wheel Diameter: 4" |
Caster Rig Material Type: Cold Rolled Steel
|
Tread Width: 2" |
Caster Rig Color/Finish: Bright Zinc Plated
|
Wheel Type: Cast Iron
|
Swivel & Rigid Casters |
Wheel Bearing Type: See Bearings Options |
Swivel Radius: 3-1/4" |
Overall Height: 5-5/8" |
Swivel Construction: Double Ball Raceway - 5/8" Kingpin |
Temp Range:-45°F to 600°F
|
Mounting Plate: 4" x 4-1/2" |
Wheel Durometer: Brinell 145
|
Bolt Hole Pattern: 2-5/8" x 3-5/8" slotted to 3"x 3" |
Wheel Color: Silver
|
Mounting Bolt Size: 3/8" or Smaller |
Link to Replacement Wheel: QSTL4M0
|
Weight: 27.6 lbs. |