$13.41
Part # Q525024HR
Availablity: Usually ships in 24-48 hoursHard rubber wheels are economically priced and recommended for applications that require higher weight capacities than soft rubber wheels can handle. These wheels work best for applications that don’t require non-marking treads or sitting in place for long periods of time. They also work well in outdoor environments and roll well over small debris, rough floors, cracks, and floor joints.
We would not recommend these wheels for applications that require sitting in one spot for long periods of time under load.
| Load Capacity (lbs.): 300 | Link to Replacement Wheel: QHR5H3 |
| Wheel Diameter: 5" | Caster Rig Color/Finish: Silver Zinc |
| Tread Width: 1-1/4" | Swivel or Rigid Caster: Swivel |
| Wheel Type: Hard Rubber | Swivel Radius: 4" |
| Wheel Bearing Type: Plain | Swivel Construction: Kingpin |
| Overall Height: 6" | Temp Range: -40˚ to 160˚F |
| Stem Size: 1/2" Threaded | Wheel Durometer: Shore D 55 (+/-5) |
| Stem Length: 2-3/4" | Wheel Color: Black |
| Stem Thread Pitch: 13 | Weight: 2.4 lbs. |
How to Install Expanding Stem Casters
Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut. This will bring the top nut down and cause the rubber element to bulge out.
Check to see if caster stem will slip into hollow leg. It should be hard to push into the leg. If it slips in too easily, then you may need to squeeze the element again as described in step one.
Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more. The caster should now be securely in place. This procedure will work for both round and square leg.
| PICTURE | PART# (Click to buy) | FITS I.D. SIZE |
|
E9 | 3/4" - 25/32" |
![]() |
E11 | 7/8" - 29/32" |
![]() |
E13 | 15/16" - 1" |
![]() |
E15 | 11/16" - 11/8" |
![]() |
E17B | 13/16" |
![]() |
E19C | 13/8" |
![]() |
E19A | 11/2" |
![]() |
E21 | 13/4" - 113/16" |
Hard rubber wheels are economically priced and recommended for applications that require higher weight capacities than soft rubber wheels can handle. These wheels work best for applications that don’t require non-marking treads or sitting in place for long periods of time. They also work well in outdoor environments and roll well over small debris, rough floors, cracks, and floor joints.
We would not recommend these wheels for applications that require sitting in one spot for long periods of time under load.
| Load Capacity (lbs.): 300 | Link to Replacement Wheel: QHR5H3 |
| Wheel Diameter: 5" | Caster Rig Color/Finish: Silver Zinc |
| Tread Width: 1-1/4" | Swivel or Rigid Caster: Swivel |
| Wheel Type: Hard Rubber | Swivel Radius: 4" |
| Wheel Bearing Type: Plain | Swivel Construction: Kingpin |
| Overall Height: 6" | Temp Range: -40˚ to 160˚F |
| Stem Size: 1/2" Threaded | Wheel Durometer: Shore D 55 (+/-5) |
| Stem Length: 2-3/4" | Wheel Color: Black |
| Stem Thread Pitch: 13 | Weight: 2.4 lbs. |
How to Install Expanding Stem Casters
Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut. This will bring the top nut down and cause the rubber element to bulge out.
Check to see if caster stem will slip into hollow leg. It should be hard to push into the leg. If it slips in too easily, then you may need to squeeze the element again as described in step one.
Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more. The caster should now be securely in place. This procedure will work for both round and square leg.
| PICTURE | PART# (Click to buy) | FITS I.D. SIZE |
|
E9 | 3/4" - 25/32" |
![]() |
E11 | 7/8" - 29/32" |
![]() |
E13 | 15/16" - 1" |
![]() |
E15 | 11/16" - 11/8" |
![]() |
E17B | 13/16" |
![]() |
E19C | 13/8" |
![]() |
E19A | 11/2" |
![]() |
E21 | 13/4" - 113/16" |
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media






