3" x 1-1/4" Hard Rubber with Swivel Caster - Select Expanding Stem Size - 300 Lbs Capacity

$10.62

Part # 8GS30KP-HR-EXP

Availablity: Usually ships in 24-48 hours

PRODUCT DETAILS

3" x 1-1/4" HARD RUBBER WHEEL WITH BALL BEARINGS HOLLOW KINGPIN CASTER - Part #: 8GS30KP-HRB-EXP

Hard rubber wheels are economically priced and recommended for applications that require higher weight capacities than soft rubber wheels can handle. These wheels work best for applications that don’t require non-marking treads or sitting in place for long periods of time. They also work well in outdoor environments and roll well over small debris, rough floors, cracks, and floor joints.

We would not recommend these wheels for applications that require sitting in one spot for long periods of time under load.

SPECIFICATIONS:

Load Capacity (lbs.): 300	Link to Replacement Wheel: QHRB3H3
Wheel Diameter: 3"	Caster Rig Color/Finish: Silver Zinc
Tread Width: 1-1/4"	Swivel or Rigid Caster: Swivel
Wheel Type: Hard Rubber	Swivel Radius: 2-7/8"
Wheel Bearing Type: Ball	Swivel Construction: Hollow Kingpin
Overall Height: 4-1/8"	Temp Range: -40˚ to 160˚F
Stem Type: Hollow Kingpin	Wheel Durometer: Shore D 55 (+/-5)
Stem Size: Various up to 1/2"	Wheel Color: Black
Clinched Hole Size: 1/2"	Weight: 1.5 lbs.

How to Install Expanding Stem Casters

Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut. This will bring the top nut down and cause the rubber element to bulge out.
Check to see if caster stem will slip into hollow leg. It should be hard to push into the leg. If it slips in too easily, then you may need to squeeze the element again as described in step one.
Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more. The caster should now be securely in place. This procedure will work for both round and square leg.

PICTURE	PART# (Click to buy)	FITS I.D. SIZE
	E9	3/4" - 25/32"
	E11	7/8" - 29/32"
	E13	15/16" - 1"
	E15	1^1/16" - 1^1/8"
	E17B	1^3/16"
	E19C	1^3/8"
	E19A	1^1/2"
	E21	1^3/4"- 1^13/16"

PRODUCT DETAILS

3" x 1-1/4" HARD RUBBER WHEEL WITH BALL BEARINGS HOLLOW KINGPIN CASTER - Part #: 8GS30KP-HRB-EXP

We would not recommend these wheels for applications that require sitting in one spot for long periods of time under load.

SPECIFICATIONS:

Load Capacity (lbs.): 300	Link to Replacement Wheel: QHRB3H3
Wheel Diameter: 3"	Caster Rig Color/Finish: Silver Zinc
Tread Width: 1-1/4"	Swivel or Rigid Caster: Swivel
Wheel Type: Hard Rubber	Swivel Radius: 2-7/8"
Wheel Bearing Type: Ball	Swivel Construction: Hollow Kingpin
Overall Height: 4-1/8"	Temp Range: -40˚ to 160˚F
Stem Type: Hollow Kingpin	Wheel Durometer: Shore D 55 (+/-5)
Stem Size: Various up to 1/2"	Wheel Color: Black
Clinched Hole Size: 1/2"	Weight: 1.5 lbs.

How to Install Expanding Stem Casters

Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut. This will bring the top nut down and cause the rubber element to bulge out.
Check to see if caster stem will slip into hollow leg. It should be hard to push into the leg. If it slips in too easily, then you may need to squeeze the element again as described in step one.
Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more. The caster should now be securely in place. This procedure will work for both round and square leg.

PICTURE	PART# (Click to buy)	FITS I.D. SIZE
	E9	3/4" - 25/32"
	E11	7/8" - 29/32"
	E13	15/16" - 1"
	E15	1^1/16" - 1^1/8"
	E17B	1^3/16"
	E19C	1^3/8"
	E19A	1^1/2"
	E21	1^3/4"- 1^13/16"