$1.06
Part # LS313
Availablity: Usually ships in 24-48 hoursOur hardened steel spanner bushings are highly durable & are designed to resist wear. They feature drilled holes to allow grease to reach the bearings.
Commonly used with 1-1/2" wide wheels that have a plain bore or a short roller bearing kit meaning the wheel has internal thrust washers & a 1-15/16" hub length.
When using a spanner inside a wheel, the bracket, washer or nut should tighten against the spanner, not the wheel, allowing the wheel to spin freely. The spanner should also be slightly wider than the wheel's hub."
|
Inside Diameter (ID): 3/8" |
Outside Diameter (OD): 1/2" |
| Fits Axle Size: 3/8" | Spanner Length: 1-15/16" |
|
Enables Grease Flow: Yes |
Material: Steel |
Our hardened steel spanner bushings are highly durable & are designed to resist wear. They feature drilled holes to allow grease to reach the bearings.
Commonly used with 1-1/2" wide wheels that have a plain bore or a short roller bearing kit meaning the wheel has internal thrust washers & a 1-15/16" hub length.
When using a spanner inside a wheel, the bracket, washer or nut should tighten against the spanner, not the wheel, allowing the wheel to spin freely. The spanner should also be slightly wider than the wheel's hub."
|
Inside Diameter (ID): 3/8" |
Outside Diameter (OD): 1/2" |
| Fits Axle Size: 3/8" | Spanner Length: 1-15/16" |
|
Enables Grease Flow: Yes |
Material: Steel |
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media