Cart

800.345.0425

3/8" ID x 1/2" OD x 1-9/16" Long Steel Spanner Cross Drilled

Part # LS300

+


3/8" ID x 1/2" OD x 1-1/2" Long Steel Spanner - Part # LS300

Our hardened steel spanner bushings are highly durable & are designed to resist wear. They feature drilled holes to allow grease to reach the bearings.

Commonly used with 2" wide wheels that have a plain bore or a short roller bearing kit meaning the wheel has internal thrust washers & a 1-9/16" hub length."

When using a spanner inside a wheel, the bracket, washer or nut should tighten against the spanner, not the wheel, allowing the wheel to spin freely. The spanner should also be slightly wider than the wheel's hub."

 

Inside Diameter (ID): 3/8" 
Outside Diameter (OD): 1/2"
Fits Axle Size: 3/8"  Spanner Length: 1-9/16" 
Enables Grease Flow: Yes 
Material: Steel

PRODUCT DETAILS

3/8" ID x 1/2" OD x 1-1/2" Long Steel Spanner - Part # LS300

Our hardened steel spanner bushings are highly durable & are designed to resist wear. They feature drilled holes to allow grease to reach the bearings.

Commonly used with 2" wide wheels that have a plain bore or a short roller bearing kit meaning the wheel has internal thrust washers & a 1-9/16" hub length."

When using a spanner inside a wheel, the bracket, washer or nut should tighten against the spanner, not the wheel, allowing the wheel to spin freely. The spanner should also be slightly wider than the wheel's hub."

 

Inside Diameter (ID): 3/8" 
Outside Diameter (OD): 1/2"
Fits Axle Size: 3/8"  Spanner Length: 1-9/16" 
Enables Grease Flow: Yes 
Material: Steel

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)