Cart

800.345.0425

6" x 2" Heavy Duty Phenolic Toolbox & Gangbox Casters, 4800 lbs Total Capacity (Oil, Chemical, & Solvent Resistant)

Part # 146DURB620-TOOLBOX

Availablity: Usually ships in 24-48 hours
+


6" x 2"  Heavy Duty Phenolic Toolbox & Gangbox Casters, 1200 lb Capacity each Caster, 4800 lbs Total capacity (Oil, Chemical, & Solvent Resistant) - Part # 146DURB620-TOOLBOX

This Toolbox Caster kit contains two swivel with brake casters with (6 in. x 2 in.) phenolic wheels & two rigid Casters with two (6 in. x 2 in.) phenolic wheels. A combination of swivel & rigid casters provide you the ability to steer your toolbox in a desired direction. This kit also includes 16 one-inch long bolts (5/16"), 16 nuts (5/16") & 16 washers to mount the casters to your toolbox or gangbox. Each heavy duty caster in this kit can hold up to 1200 lbs per caster. All four casters together give you a total capacity of 4800 lbs for all your tools. Typically, the larger the wheel is on a caster, the easier it is to roll. Just keep in mind clearance, we offer the same kit in a smaller wheel size if needed. These caster give you an overall height of 7-1/2 inches from the ground.

Phenolic wheels are a great alternative to steel wheels. Phenolic wheels give you similar capacities to steel wheels, however, they provide better floor protection, slightly quieter rolling, do not rust, & are more economically priced. Phenolic wheels are made using phenolic resin mixed with macerated canvas which yields a high capacity & high impact wheel. They have hard treads & will not flat spot over time which is why they are often used on equipment with heavy loads. Phenolic wheels are resistant to oil, grease & solvents. They are also non-metallic & non-sparking.

SHOULD BE ABLE to mount to be mounted to Milwaukee, Ridgid, Jobox, Husky, Kobalt, Westward, Dewalt, Knaack, Entrix & more toolboxes/jobsite boxes. PLEASE CONFIRM FOR YOURSELF PRIOR TO PURCHASING. Check the photos for exact dimensions (4-1/2 in x 4 in. plate). Contact Mapp Caster & Supply for Help.
If you need more floor protection, a cushioned ride, or a quieter rolling wheel, we recommend checking out our polyurethane on iron toolbox caster kit.

*This kit can be used for other applications such as BBQ pits & more. 

Specifications:

Load Capacity (lbs.): 1,200

Combined Caster Capacity: 4,800

Link to Replacement casters

Swivel Caster: 146DURB620SB,Rigid Caster: 146DURB620R

Wheel Diameter: 6" Caster Rig Material Type: Cold Rolled Steel
Tread Width: 2" Caster Rig Color/Finish: Bright Zinc Plated
Wheel Type: Phenolic Swivel & Rigid Casters
Wheel Bearing Type: See Bearings Options Swivel Radius: 4-9/16"
Overall Height: 7-1/2" Swivel Construction: Double Ball Raceway - 5/8" Kingpin
Temp Range: -50°F to 250°F Mounting Plate: 4" x 4-1/2"
Wheel Durometer:  Shore D 90 (+/-5) Bolt Hole Pattern: 2-5/8" x 3-5/8" slotted to 3"x 3"
Wheel Color: Black Mounting Bolt Size: 3/8" or Smaller
Link to Replacement Wheel: QPHN6M0 Weight: 24.74 lbs.

PRODUCT DETAILS

6" x 2"  Heavy Duty Phenolic Toolbox & Gangbox Casters, 1200 lb Capacity each Caster, 4800 lbs Total capacity (Oil, Chemical, & Solvent Resistant) - Part # 146DURB620-TOOLBOX

This Toolbox Caster kit contains two swivel with brake casters with (6 in. x 2 in.) phenolic wheels & two rigid Casters with two (6 in. x 2 in.) phenolic wheels. A combination of swivel & rigid casters provide you the ability to steer your toolbox in a desired direction. This kit also includes 16 one-inch long bolts (5/16"), 16 nuts (5/16") & 16 washers to mount the casters to your toolbox or gangbox. Each heavy duty caster in this kit can hold up to 1200 lbs per caster. All four casters together give you a total capacity of 4800 lbs for all your tools. Typically, the larger the wheel is on a caster, the easier it is to roll. Just keep in mind clearance, we offer the same kit in a smaller wheel size if needed. These caster give you an overall height of 7-1/2 inches from the ground.

Phenolic wheels are a great alternative to steel wheels. Phenolic wheels give you similar capacities to steel wheels, however, they provide better floor protection, slightly quieter rolling, do not rust, & are more economically priced. Phenolic wheels are made using phenolic resin mixed with macerated canvas which yields a high capacity & high impact wheel. They have hard treads & will not flat spot over time which is why they are often used on equipment with heavy loads. Phenolic wheels are resistant to oil, grease & solvents. They are also non-metallic & non-sparking.

SHOULD BE ABLE to mount to be mounted to Milwaukee, Ridgid, Jobox, Husky, Kobalt, Westward, Dewalt, Knaack, Entrix & more toolboxes/jobsite boxes. PLEASE CONFIRM FOR YOURSELF PRIOR TO PURCHASING. Check the photos for exact dimensions (4-1/2 in x 4 in. plate). Contact Mapp Caster & Supply for Help.
If you need more floor protection, a cushioned ride, or a quieter rolling wheel, we recommend checking out our polyurethane on iron toolbox caster kit.

*This kit can be used for other applications such as BBQ pits & more. 

Specifications:

Load Capacity (lbs.): 1,200

Combined Caster Capacity: 4,800

Link to Replacement casters

Swivel Caster: 146DURB620SB,Rigid Caster: 146DURB620R

Wheel Diameter: 6" Caster Rig Material Type: Cold Rolled Steel
Tread Width: 2" Caster Rig Color/Finish: Bright Zinc Plated
Wheel Type: Phenolic Swivel & Rigid Casters
Wheel Bearing Type: See Bearings Options Swivel Radius: 4-9/16"
Overall Height: 7-1/2" Swivel Construction: Double Ball Raceway - 5/8" Kingpin
Temp Range: -50°F to 250°F Mounting Plate: 4" x 4-1/2"
Wheel Durometer:  Shore D 90 (+/-5) Bolt Hole Pattern: 2-5/8" x 3-5/8" slotted to 3"x 3"
Wheel Color: Black Mounting Bolt Size: 3/8" or Smaller
Link to Replacement Wheel: QPHN6M0 Weight: 24.74 lbs.

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)