These 1/2" I.D. Flanged Brass Bushings with spanner bushing can be used in many applications, but are specifically designed for high temperature or corrosive applications. These bearings also work well for applications that are particularly hard on bearings, like sand blasting rooms. While these bushings do not require grease, it is perfectly fine to use it. If higher temperatures are needed, check out our tin bronze bushings.
| Bearing ID: 1/2" | Bearings OD: 1-3/16" |
| Temp Range: -45˚F to 500˚F | Hub Length 1-1/2" Wheel Installed: 1-7/8" |
These 1/2" I.D. Flanged Brass Bushings with spanner bushing can be used in many applications, but are specifically designed for high temperature or corrosive applications. These bearings also work well for applications that are particularly hard on bearings, like sand blasting rooms. While these bushings do not require grease, it is perfectly fine to use it. If higher temperatures are needed, check out our tin bronze bushings.
| Bearing ID: 1/2" | Bearings OD: 1-3/16" |
| Temp Range: -45˚F to 500˚F | Hub Length 1-1/2" Wheel Installed: 1-7/8" |
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media