Cart

800.345.0425


Track Wheels

 Shop All

Shop here for V groove & U-Groove caster wheels! Industrial V groove wheels are designed to guide equipment by rolling on inverted angle iron track, however, most options can also operate while not on a track thanks to the tread on either side of the v-groove. U-Groove wheels are designed to roll on pipe. Find heavy duty grooved wheels to light duty grooved wheels, and an assortment of sizes to choose from, you can find the right wheel for your application. 

We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

*Please note if more than one track is being used, it is critical for the tracks to be parallel, strait and level. Otherwise the wheels could bind or derail. Recommend track tolerance is 1/64" per 20 Feet.

+
+
+
+

Wheels - Metal Wheels

 Shop All

Shop here for steel & metal caster wheels. Metal caster wheels offer the highest weight capacity and perform well in severe and abusive applications, however, they are the harshest caster wheel type for floors. For floor protective wheels, be sure to check out our polyurethane wheels.

These heavy duty casters wheels come in several types of metal. The difference between theses industrial steel wheels is listed below. We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

Sintered Iron: made from super compressed powdered iron into wheel molds that a strong, durable, attractive, & cost effective solution for light-medium duty loads

Heavy Duty Cast Iron: made from cast metal with thicker spokes and hubs than standard cast iron wheels. Offers a durable and cost effective solution for heavy loads

Ductile Steel: made from a combination of alloys that give it a higher weight capacity than cast iron and is more economical than forged steel.

Forged Steel: made from ASTM 1045 high carbon steel that is hot drop forged. Offers the maximum weight capacity, impact strength, and durability of all the metal wheels.

+
+
+
+

Wheels - Phenolic Wheels

 Shop All

Shop here for phenolic caster wheels! These wheels are made using phenolic resin mixed with macerated canvas which yields a high capacity and high impact wheel. The phenolic wheels hard tread (90 Shore D) will not flat spot over time which is why it is often used on Bar-B-Que pits, storage bins, and other industrial equipment that is under constant heavy loads. Phenolic wheels are resistant to oil, grease, solvents, non-metallic, & non-sparking. They have a temperature range of -40° to 250° F, with intermittent use up to 300° F. Phenolic caster wheels are not recommend for wet applications where the wheel will be in standing water. These wheels are also one of the most economically priced caster wheels and often is used in place of steel wheel casters.

We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+

Wheels - High Temp Wheels

 Shop All

With these high temperature caster wheels you can stop worrying about the heat slowing you down! Find a variety of wheels types with wheel sizes ranging from 2" to 8" and up to 550˚F. These high heat wheels can be used in numerious applications. Some popular applications include bakery racks, powder coating rooms, autoclaves, and industrial ovens just to name a few. 

Needing higher temperature solutions? Check out our metal wheels with temperatures up to 1,300˚F! We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+

Wheels - Retort & Plastic

 Shop All

Plastic and retort caster wheels are very similar. Both wheel types are solid injected molded which yields a high shock load, impact resistant, and abrasion resistant wheel. These wheels are lightweight yet hold high weight capacities and are also non-marking. They also are washable, impervious to water, and highly resistant to solvents, oils, grease, most chemicals, and cleaning solutions. The difference between the wheels is the temperature rating. Retort wheels have a 290°F limit where as plastic have a 180°F limit.

Because of these many features and economical price point that plastic and retort wheels are very popular, espicallly in kitchens and other wash down applications. We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+

Hand truck Wheels

 Shop All

Shop replacement hand truck wheels here! Our hand truck wheels are available in two sizes, 8" and 10". Some of the hand truck wheels might also have number printed on the side. If the numbers say 2.80/2.50-4, it will be an 8" wheel. If the numbers say 4.10/3.50-4, it will be a 10" wheel. We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+

Wheels - Pneumatic Wheels

 Shop All

Shop here for pneumatic (air) and flat free caster wheels. These castor wheels have wide tread faces that are ideal for rolling on grass, dirt, and other similar terrains. The wheels also have a softer tread that provides a smooth cushioned ride, rolling easily over debris and other small obstacles. The wheels are often used on hand trucks, dollies, equipment carts, generators, and many other applications.

If you are trying to match an existing wheel, do the following. First, check to see if there is a size already on the wheel, for example, 4.10 x 3.50-4. If a size is not provided, measure the wheels outside diameter and width. Next, check the hub length. The hub length is the measurement if you were to stick a measuring tape through the wheel and measure from end to end. Note that some hubs are offset, meaning that protrude further to one side, and some are centered, meaning they protrude the same distance to each side. Finally, measure the bearing ID. The bearing ID will be the same as the shaft size. Once you have these measurements you can find the matching wheel.

We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+

Concrete Saw Wheels

 Shop All

Shop a our selection of concrete saw wheels! These wheels fit a variety of concrete saw manufacturers such as Husqvarna, Diamond, & more. We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+

Light Duty Steel Wheels

 Shop All

Shop here for semi-pneumatic wheels. The light duty steel wheels are flat free and are often found on lawn furniture, carts, wagons, light duty hand trucks, barbecue grills, trash containers, and other light duty applications.

If you are trying to match an existing wheel, do the following. First, check to see if there is a size already on the wheel, for example, 6 x 1.5. If a size is not provided, measure the wheels outside diameter and width. Next, check the hub length. The hub length is the measurement if you were to stick a measuring tape through the wheel and measure from end to end. Note that some hubs are offset, meaning that protrude further to one side, and some are centered, meaning they protrude the same distance to each side. Finally, measure the bearing ID. The bearing ID will be the same as the shaft size. Once you have these measurements you can find the matching wheel.

We offer even more products that are not on our site! If you don’t see what you need or have questions, contact us, we are happy to help.

+
+
+
+