Cart

800.345.0425

5" x 1-1/4" Thermoplastic Rubber Wheel Swivel Caster with Brake - Select Expanding Stem Size - 250 Lbs Capacity

Part # Q525024MIRTLB

Availablity: Usually ships in 24-48 hours
+


5" x 1-1/4" THERMOPLASTIC RUBBER WHEEL SWIVEL WITH 1/2" x 13 - 2-3/4" THREADED STEM AND BRAKE - Part#: Q525024MIRTLB

Thermoplastic Rubber Wheels combine the advantages of both a hard & soft tread material in a single wheel, making it one of our favorite caster wheels. Like a hard tread wheel, thermoplastic rubber rolls easily and is very durable. Like a soft tread wheel, it is quiet, protects floors, and has a cushioned ride. These caster wheels also hold up well when exposed to weather, are resistant to chemicals, water, & steam, and reject floor debris. We highly recommend these caster for applications requiring non-marking, floor protective, quiet, and smooth rolling wheels. We would not recommend these wheels for applications that require sitting in one spot for long periods of time under heavy loads.

SPECIFICATIONS:

Load Capacity (lbs.): 250 Link to Replacement Wheel:  QMIR5G3
Wheel Diameter: 5" Caster Rig Color/Finish: Silver Zinc
Tread Width: 1-1/4" Swivel or Rigid Caster: Swivel 
Wheel Type: Thermoplastic Rubber Swivel Radius: 4"
Wheel Bearing Type: Ball Swivel Construction: Kingpin
Overall Height: 6" Temp Range:  -45˚ to 180˚F 
Stem Size: 1/2" Threaded Wheel Durometer: Shore A 65 (+/-5)
Stem Length: 2-3/4" Wheel Color: Grey
Stem Thread Pitch: 13 Weight: 2.4 lbs.

 

How to Install Expanding Stem Casters

  1. Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut.  This will bring the top nut down and cause the rubber element to bulge out.

  2. Check to see if caster stem will slip into hollow leg.  It should be hard to push into the leg.  If it slips in too easily, then you may need to squeeze the element again as described in step one.

  3. Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more.  The caster should now be securely in place.  This procedure will work for both round and square leg.

PICTURE PART# (Click to buy) FITS I.D. SIZE
 E9 E9 3/4" - 25/32"
E11 E11 7/8" - 29/32"
E13 E13 15/16" - 1"
E15 E15 11/16" - 11/8"
E17B E17B 13/16"
E19C E19C 13/8"
E19A E19A 11/2"
E21 E21 13/4" - 113/16"

PRODUCT DETAILS

5" x 1-1/4" THERMOPLASTIC RUBBER WHEEL SWIVEL WITH 1/2" x 13 - 2-3/4" THREADED STEM AND BRAKE - Part#: Q525024MIRTLB

Thermoplastic Rubber Wheels combine the advantages of both a hard & soft tread material in a single wheel, making it one of our favorite caster wheels. Like a hard tread wheel, thermoplastic rubber rolls easily and is very durable. Like a soft tread wheel, it is quiet, protects floors, and has a cushioned ride. These caster wheels also hold up well when exposed to weather, are resistant to chemicals, water, & steam, and reject floor debris. We highly recommend these caster for applications requiring non-marking, floor protective, quiet, and smooth rolling wheels. We would not recommend these wheels for applications that require sitting in one spot for long periods of time under heavy loads.

SPECIFICATIONS:

Load Capacity (lbs.): 250 Link to Replacement Wheel:  QMIR5G3
Wheel Diameter: 5" Caster Rig Color/Finish: Silver Zinc
Tread Width: 1-1/4" Swivel or Rigid Caster: Swivel 
Wheel Type: Thermoplastic Rubber Swivel Radius: 4"
Wheel Bearing Type: Ball Swivel Construction: Kingpin
Overall Height: 6" Temp Range:  -45˚ to 180˚F 
Stem Size: 1/2" Threaded Wheel Durometer: Shore A 65 (+/-5)
Stem Length: 2-3/4" Wheel Color: Grey
Stem Thread Pitch: 13 Weight: 2.4 lbs.

 

How to Install Expanding Stem Casters

  1. Squeeze element by holding bottom of stem (with a wrench, or by hand in some cases), and twisting the top nut.  This will bring the top nut down and cause the rubber element to bulge out.

  2. Check to see if caster stem will slip into hollow leg.  It should be hard to push into the leg.  If it slips in too easily, then you may need to squeeze the element again as described in step one.

  3. Once snug in place in the leg, the friction should keep the element from slipping while you tighten it a little more.  The caster should now be securely in place.  This procedure will work for both round and square leg.

PICTURE PART# (Click to buy) FITS I.D. SIZE
 E9 E9 3/4" - 25/32"
E11 E11 7/8" - 29/32"
E13 E13 15/16" - 1"
E15 E15 11/16" - 11/8"
E17B E17B 13/16"
E19C E19C 13/8"
E19A E19A 11/2"
E21 E21 13/4" - 113/16"

PRODUCT QUESTIONS & ANSWERS

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

CUSTOMER REVIEWS