10" x 3" Phenolic Wheel P70 Rigid Caster - 2,900 Lbs Capacity

$99.33

Part # P7010301302

Availablity: Usually ships in 24-48 hours

PRODUCT DETAILS

10" x 3" Phenolic Wheel Rigid Caster - Part# P7010301302

Phenolic wheels are a great alternative to steel wheels. Phenolic wheels give you similar capacities to steel wheels, however, they provide better floor protection, slightly quieter rolling, do not rust, & are more economically priced.

Phenolic wheels are made using phenolic resin mixed with macerated canvas which yields a high capacity and high impact wheel. They have hard treads & will not flat spot over time which is why they are often used on equipment that is under constant heavy loads, such as storage bins, dumpsters, and BBQ Pits. Phenolic wheels are resistant to oil, grease, solvents, non-metallic, & non-sparking.

*Caster ordered with welded on swivel locks or toe guards will have a 3-6 business day lead time to ship.

Specifications:

Load Capacity (lbs.): 2,900	Link to Matching Swivel Caster: P7110301301
Wheel Diameter: 10"	Caster Rig Material Type: AISI 1045 Heat Treated Laser Cut Steel
Tread Width: 3"	Caster Rig Color/Finish: Bright Zinc Plated
Wheel Type: Phenolic	Swivel or Rigid Caster: Rigid
Wheel Bearing Type: See Bearings Options	Swivel Radius: N/A
Overall Height: 12-1/2"	Swivel Construction: N/A
Temp Range: -40 to 250˚F	Mounting Plate: 5-1/4" x 7-1/4"
Wheel Hardness: Shore 90 D (+/-5)	Bolt Hole Pattern: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"
Wheel Color: Black	Mounting Bolt Size: 1/2" or Smaller
Link to Replacement Wheel: QPHN10R0	Weight: 25 lbs.

Caster Options:

Bearings: For a description and picture of each bearing type - Click Here

Face Contact Brake: Designed for heavy duty casters, this brake can be activated be either foot or hand. The brake pad presses on the face of the wheel to prevent the wheel from spinning.

Weld Plate / Shim: This heavy duty caster can be ordered with an additional weld plate. This allows you to weld the additional plate to the equipment and then bolt the caster on. If you ever need to remove or replace the caster it is much easier than cutting off the old caster and then welding the new caster back on. The plate can also be used to add additional height to the caster. The plate is .350" thick and is zinc plated. The dimensions match the picture of the drawing and can also be found in the specifications section.

4-Position Swivel Lock: This allows you to turn a swivel caster into a rigid caster. When the pin is released into one of the 4 slots located 90 degrees apart, it locks the swivel section in place. Both a welded on option and a field installable bolt on option are available.

Toe Guard: This option is designed to help prevent toes and other objects from being rolled over by the heavy duty caster.

PRODUCT DETAILS