800.345.0425

Toolbox, Job Box, and Gangbox Casters

April 30, 2020

Toolbox, Job Box, and Gangbox Casters

Your toolbox can be very crucial to you. It houses the tools that make repairs and maintain items in our daily lives. For some of us, our toolbox is the very thing that puts food on the table.

Whether you're making your toolbox, job box, or gangbox mobile, here's a few things to keep in mind.

What kind of floor will it be rolling on? How often is it going to move?

If you plan on moving the toolbox often to different locations, polyurethane casters give some cushion to roll over bumps and cracks without causing floor damage, great for many situations and floors.

Phenolic and polyolefin wheel excel on smooth surfaces, but struggle rolling over bumps and cracks. Steel does similarly, but damages floors with extended use.

Depending on how much your toolbox travels, your caster selection may not matter as much.

Consider your environment

Phenolic and polyolefin casters are ideal for shops because they are resistant to oil, chemicals, and more. 

Polyurethane is not recommended in environments that are often wet or in direct sunlight.

Steel casters are not ideal for constantly wet floors or floors that need protection.

How much capacity do you need? 

Needing a high capacity can limit your caster choices. Keep in mind that caster capacity is multiplied by how many casters the weight is evenly distributed to.

Softer wheels often have lower capacities, while harder wheels usually have higher capacities.

Consider overall height

Adding casters to the bottom of a job box will increase the total height. If you have height restrictions, double check how tall the casters can be, and get something that is less than this height.

Keep in mind that casters with larger wheel diameters roll easier than smaller or low-profile casters.

View some of our ready to go kits

4" x 2" Heavy Duty Polyolefin Toolbox & Gangbox Casters, 2000lb Total Capacity (Oil, Chemical, & Solvent Resistant)

This caster kit offers great value at a low cost. Polyolefin casters are resistant to solvents, oils, grease, most chemicals and cleaning solutions. Polyolefin caster wheels are also impact and abrasion resistant. This caster can withstand the harshest  environments making it a great choice for the auto industry & many others.

5" x 2" Heavy Duty Polyurethane on Iron Toolbox & Gangbox Casters, 5000 lbs Total Capacity (Good Floor Protection)

Polyurethane on iron casters are meant to carry large capacities while providing a smooth ride. The polyurethane tread helps get over bumps and cracks while offering decent floor protection making it more ideal for the toolbox that will be traveling often. 

Final Thoughts

No caster is an all in one caster. When it comes to picking out a caster, consider the points above and decide what is most important to you on your job box.

Not sure what your toolbox needs? Have questions about picking out a caster? Give us a call at 800-345-0425 (Mon-Fri 7:00AM to 4:30PM CST) or contact us and a caster expert will assist you.






Also in Caster Knowledge

Kitchen Casters: Caster Wheels
Kitchen Casters: Caster Wheels

November 17, 2026

Learn how to choose the best commercial kitchen caster wheels by comparing heat resistance, floor protection, chemical resistance, and rolling performance.

View full article →

Polished Concrete and Wheel Staining
Polished Concrete and Wheel Staining

November 13, 2026

Why some wheels stain polished concrete, and how to choose ones that won't. The wrong caster wheels can leave permanent brown marks on a polished concrete floor. The fix is simple: choose the right wheel material from the start.

View full article →

Kitchen Casters: Caster Rigs
Kitchen Casters: Caster Rigs

October 06, 2026

Commercial kitchen casters face heat, grease, chemicals, and washdowns. Learn how stainless steel rigs, seals, and dust covers improve caster durability

View full article →