January 31, 2022
A caster is composed of 4 major components: the wheel, rig, axle, and nut. To learn more about the wheel and rig, see our other articles:
Just like the rig, the wheel plays a major role. Picking the right wheel is essential to how much effort it will take to move, the amount of weight it can carry, and its overall longevity.
The hardness (or softness) of a wheel is dependent on the type of floors the wheels will be rolling on, the capacity they will need to carry, and how often they will move.
Soft wheels are great on rough floors, able to flatten out and roll easier over debris and cracks. However, the softer material also means the wheel will have a lower capacity and are more likely to flat spot.

Hard wheels are ideal for smooth floors, and have a harder time rolling on rough surfaces. They are able to carry higher capacities, and often last longer in use. Remember that hard wheels are also more likely to cause damage to the floor.

As a rule of thumb, the larger the wheel's diameter, the easier it is to move. This is helpful when rolling over rough surfaces or small debris. Diameter is also related to capacity - a larger wheel can carry more capacity.

The width of a caster wheel is another big determinant of capacity. The wider the wheel, the more weight it can bear. We recommend a wider wheel (if the rig's forks allow it) for the sake of higher capacity - it's better to have more than you need than not enough!


Between the wheel and the axle can be a bearing or bushing, which assist in moving the wheel and make rolling the caster easier and smoother.
There isn't room for bearings or bushings on every wheel - plain bore wheels rest directly on the wheel - but many wheels will have a larger bore to accommodate the bearing or bushing fitting on the axle.
When deciding to go with a bearing, bushing, or neither, consider the following:
If not used in wet or hot environments, any bearing option can be used, suited to your budget and preferences.
To learn more about bearings and bushings, go here for an in-depth look. This article only scratches the surface!
There are quite a lot of wheels to choose from in the caster world, and it's very easy to get confused or overwhelmed. Below is a quick guide with the major characteristics you should consider when purchasing a wheel, and the wheel materials which have those properties:
![]() |
Floor Protective |
|
![]() |
Non-Marking |
|
![]() |
Chemical Resistant |
|
![]() |
Great for Water |
|
![]() |
Harsh on Floors |
|
![]() |
Soft-Treaded |
|
![]() |
May Flat Spot |
|
![]() |
Hard-Treaded |
|
When it comes to picking out a caster wheel, consider the floors it will be rolling on and environment it will be working in. Consider the diameter of the wheel and whether it will assist you or restrict you. Consider the amount of weight bearing down on the wheel.
Need some help prioritizing different characteristics? Not sure which bearing option to go with? Contact us or give us a call at 800-345-0425 (Mon-Fri 7AM - 4:30 PM). We are more than happy to help you out with your project!
November 17, 2026
Learn how to choose the best commercial kitchen caster wheels by comparing heat resistance, floor protection, chemical resistance, and rolling performance.
November 13, 2026
Why some wheels stain polished concrete, and how to choose ones that won't. The wrong caster wheels can leave permanent brown marks on a polished concrete floor. The fix is simple: choose the right wheel material from the start.
October 06, 2026
Commercial kitchen casters face heat, grease, chemicals, and washdowns. Learn how stainless steel rigs, seals, and dust covers improve caster durability
Mapp Caster & Supply, Inc | 320 N. Sampson St | Houston, TX 77003 | 800.345.0425
© 2026 Mapp Caster. Website by Trailblaze Media







